by229(x,b)-200 thru by229(x,b)-800 vishay general semiconductor document number: 88540 revision: 06-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 1 fast switching plastic rectifier features ? glass passivated chip junction ? superfast recovery time for high efficiency ? low leakage current ? high forward surge capability ? meets msl level 1, per j-std-020, lf maximum peak of 245 c (for to-263ab package) ? solder dip 260 c, 40 s (for to-220ac and ito-220ac package) ? component in accordance to rohs 2002/95/ec and weee 2002/96/ec typical applications for use in fast switchin g rectification of power supply, inverters, converters and freewheeling diodes application. mechanical data case: to-220ac, ito-220ac, to-263ab epoxy meets ul 94v-0 flammability rating terminals: matte tin plated leads, solderable per j-std-002 and jesd22-b102 e3 suffix for commercial grade, meets jesd 201 class 1a whiskter test, he3 suffix for high reliability grade (aec q101 qualified), meets jesd 201 class 2 whisker test polarity: as marked mounting torque: 10 in-lbs maximum primary characteristics i f(av) 8.0 a v rrm 200 v to 800 v i fsm 100 a t rr 145 ns v f 1.85 v t j max. 150 c to-263ab case pin 2 pin 1 to-220ac ito-220ac pin 1 pin 2 k heatsink 1 2 1 2 k by229 series by229x series by229b series pin 2 pin 1 1 2 maximum ratings (t c = 25 c unless otherwise noted) parameter symbol by229-200 by229-400 by229-600 by229-800 unit maximum recurrent peak reverse voltage v rrm 200 400 600 800 v maximum rms voltage v rms 140 280 420 560 v maximum dc blocking voltage v dc 200 400 600 800 v maximum average forward rectified current at t c = 100 c i f(av) 8.0 a peak forward surge current 8.3 ms single half sine-wave superimposed on rated load i fsm 100 a maximum slope of reverse recovery current i f = 2.0 a, v r = 30 v, di/dt = 20 s di/dt 60 a/ s operating junction and storage temperature range t j , t stg - 40 to + 150 c isolation voltage (ito-220ac only) from terminal to heatsink t = 1 min v ac 1500 v
by229(x,b)-200 thru by229(x,b)-800 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88540 revision: 06-nov-07 2 note: (1) pulse test: 300 s pulse width, 1 % duty cycle note: (1) automotive grade aec q101 qualified electrical characteristics (t c = 25 c unless otherwise noted) parameter test conditions symbol by229-200 by229-400 by229-600 by229-800 unit maximum instantaneous forward voltage (1) 20 a v f 1.85 v maximum dc reverse current at rated dc blocking voltage t j = 25 c t j = 125 c i r 10 300 a maximum reverse recovery time i f = 1.0 a, v r = 30 v, di/dt = 50 a/s, i rr = 10 % i rm t rr 145 ns maximum recovered stored charge i f = 2.0 a, v r = 30 v, di/dt = 20 a/s q rr 700 nc thermal characteristics (t c = 25 c unless otherwise noted) parameter symbol by229 by229x by229b unit typical thermal resistance from junction to case r jc 2.0 4.8 2.0 c/w typical thermal resistance from junction to air r ja 20 - 20 c/w ordering information (example) package preferred p/n unit weight (g) package code base quantity delivery mode to-220ac by229-200-e3/45 1.80 45 50/tube tube ito-220ac by229x-200-e3/45 1.95 45 50/tube tube to-263ab by229b-200-e3/45 1.77 45 50/tube tube to-263ab by229b-200-e3/81 1.77 81 800/reel tape reel to-220ac by229-200he3/45 (1) 1.80 45 50/tube tube ito-220ac by229x-200he3/45 (1) 1.95 45 50/tube tube to-263ab by229b-200he3/45 (1) 1.77 45 50/tube tube to-263ab by229b-200he3/81 (1) 1.77 81 800/reel tape reel
by229(x,b)-200 thru by229(x,b)-800 vishay general semiconductor document number: 88540 revision: 06-nov-07 for technical questions within your r egion, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com www.vishay.com 3 ratings and characteristics curves (t a = 25 c unless otherwise noted) figure 1. forward current derating curve figure 2. maximum non-repetitive peak forward surge current figure 3. typical instantaneous forward characteristics 0 4 12 0 75 25 50 100 125 150 8 2 6 10 a v erage for w ard re ctified c u rrent (a) case am b ient temperat u re (c) resisti v e or ind u cti v e load 0 75 100 125 50 25 150 1 100 10 nu m b er of cycles at 60 hz peak for w ard s u rge c u rrent (a) t l = 75 c 8 .3 ms single half sine- w a v e 100 10 1 0.1 0.4 0.6 1.4 1.6 1. 8 2.0 0. 8 1.0 1.2 instantaneo u s for w ard v oltage ( v ) instantaneo u s for w ard c u rrent (a) t j = 100 c t j = 150 c t j = 125 c t j = 25 c p u lse w idth = 300 s 1 % d u ty cycle figure 4. typical reverse leakage characteristics figure 5. typical junction capacitance 0.1 1 10 100 0.01 20 0 100 40 60 8 0 1000 t j = 100 c t j = 150 c t j = 125 c t j = 25 c percent of rated peak re v erse v oltage ( % ) instantaneo u s re v erse leakage c u rrent ( a) 1 100 100 10 10 re v erse v oltage ( v ) j u nction capacitance (pf) t j = 25 c f = 1.0 mhz v sig = 50 m v p-p
by229(x,b)-200 thru by229(x,b)-800 vishay general semiconductor www.vishay.com for technical questions within your region, please contact one of the following: pdd-americas@vishay.com , pdd-asia@vishay.com , pdd-europe@vishay.com document number: 88540 revision: 06-nov-07 4 package outline dimensions in inches (millimeters) to-220ac case pi n 2 pi n 1 0.635 (16.13) 0.625 (15. 8 7) 0.415 (10.54) max. 0.154 (3.91) dia. 0.14 8 (3.74) dia. 0.113 (2. 8 7) 0.103 (2.62) 0.370 (9.40) 0.360 (9.14) pi n 12 0.160 (4.06) 0.140 (3.56) 0.057 (1.45) 0.045 (1.14) 0.105 (2.67) 0.095 (2.41) 0.037 (0.94) 0.027 (0.6 8 ) 0.205 (5.20) 0.195 (4.95) 0.022 (0.56) 0.014 (0.36) 1.14 8 (29.16) 1.11 8 (2 8 .40) 0.560 (14.22) 0.530 (13.46) 0.110 (2.79) 0.100 (2.54) 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.145 (3.6 8 ) 0.135 (3.43) 0.603 (15.32) 0.573 (14.55) 0.055 (1.39) 0.045 (1.14) 0.1 8 5 (4.70) 0.175 (4.44) it o -220a c pi n 1 2 0.025 (0.64) 0.015 (0.3 8 ) 0.404 (10.26) 0.3 8 4 (9.75) 0.076 (1.93) ref. 0.076 (1.93) ref. 45 ref. 0.600 (15.24) 0.5 8 0 (14.73) 0.560 (14.22) 0.530 (13.46) 0.035 (0. 8 9) 0.025 (0.64) 0.205 (5.21) 0.195 (4.95) 0.191 (4. 8 5) 0.171 (4.35) 0.057 (1.45) 0.045 (1.14) 0.671 (17.04) 0.651 (16.54) 0.02 8 (0.71) 0.020 (0.51) 0.110 (2.79) 0.100 (2.54) 7 ref. 7 ref. 7 ref. 0.350 ( 8 . 8 9) 0.330 ( 8 .3 8 ) 0.140 (3.56) dia. 0.125 (3.17) dia. 0.135 (3.43) dia. 0.122 (3.0 8 ) dia. 0.110 (2.79) 0.100 (2.54) 0.190 (4. 8 3) 0.170 (4.32) to-263ab mo u nting pad layo u t 0.670 (17.02) 0.591 (15.00) 0.105 (2.67) 0.095 (2.41) 0.0 8 (2.032) mi n . 0.15 (3. 8 1) mi n . 0.33 ( 8 .3 8 ) mi n . 0.42 (10.66) mi n . 12 k k 0.140 (3.56) 0.110 (2.79) 0.021 (0.53) 0.014 (0.36) 0.110 (2.79) 0.090 (2.29) 0 to 0.01 (0 to 0.254) 0.055 (1.40) 0.047 (1.19) 0.055 (1.40) 0.045 (1.14) 0.190 (4. 8 3) 0.160 (4.06) 0.205 (5.20) 0.195 (4.95) 0.624 (15. 8 5) 0.591 (15.00) 0.037 (0.940) 0.027 (0.6 8 6) 0.105 (2.67) 0.095 (2.41) 0.360 (9.14) 0.320 ( 8 .13) 0.411 (10.45) 0.3 8 0 (9.65) 0.245 (6.22) mi n .
document number: 91000 www.vishay.com revision: 18-jul-08 1 disclaimer legal disclaimer notice vishay all product specifications and data are subject to change without notice. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, ?vishay?), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. vishay disclaims any and all li ability arising out of the use or application of any product describ ed herein or of any information provided herein to the maximum extent permit ted by law. the product specifications do not expand or otherwise modify vishay?s terms and conditions of purcha se, including but not limited to the warranty expressed therein, which apply to these products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of vishay. the products shown herein are not designed for use in medi cal, life-saving, or life-sustaining applications unless otherwise expressly indicated. customers using or selling vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify vishay for any damages arising or resulting from such use or sale. please contact authorized vishay personnel to obtain written terms and conditions regarding products designed for such applications. product names and markings noted herein may be trademarks of their respective owners.
|
